Preform fit:Paste the shape of the product according to the structural design drawing, not more paste less paste.

Preform into the mold:When entering the mold, the preformed product should be straightened out to avoid yarn clamping.

Thermoforming:155±5℃/1 hour.

cooling:After cooling, the mold surface temperature is 90℃↓.

Mould to take product:The product must not be bruised.

Pull air bag:The air bag needs to be removed clean.

Secondary heating:The product is heated twice to eliminate internal stress and improve the reaction rate. 150±5℃/2.5 hours.

Sandblasting:The product is sandblasted and coarsened.

Hole processing:Choose the correct program for hole processing according to customer needs.

Polish:Add primer to the surface of the product and make the surface of the product smooth.

The production processes are as follows:

preform->molding->forming->processing->gluing

Preform is a very important process for carbon fiber products, directly related to the strength, size, appearance etc... 

Molding this section is the most important for the products, GO and Ng is basically decided by this section, this section of the production equipment is high temperature and high pressure, it is in this special environment to promote a good product. 

Processing this section for the removal of product scraps and cutting excess pipe processes, related to the drilling accessories. 

Gluing section is the product for gluing, using high-temperature Epoxy, high-temperature baking fixed.